videocon d2h is the leading indian dth service and its offering all the major indian channels. here you can check the first time installation of videocon d2h. if you are accidentally reset the d2h stb or if you want to rest it can check this steps. once you done the factory reset option in videocon it will ask for first time installation.
they using the satellite st2 at 88.00 degree east for the transmission. videcon d2h using the DVB-S2 MPEG-4 system and its encrypted. all the videocon d2h stb’s are paired, means card and stb are paired. that means your card is working only in your stb, its not work with other stb’s. you can get full list of all the transponders of videocon d2h from here. you need to align the ku band dish at 88.00 east to catch videocon d2h signals.
There are 2 type of password need to tune/check signal level of d2h set top box, first one is common for all. 1234 is the password of videocon d2h set top box, you can enter the values using remote keys. second one is not common, it’s depends on your smart card number. This password need for setting up each set top box, all transponders are pre-loaded we need to align the dish and lnb positions.
to get videocon d2h stb password, first check your smart card number. It’s the combination of your 4th, 6th, 8th and 10th number of the smart card. for example your smart card number is 1234 5678 910, it will be 4681. This is the set top box password your d2h box. you need this password for the satellite management, checking signal strength, scan channels etc.