Signal Strength & Quality

[admin View Profile Find User's Posts Find User's Threads PM User E-Mail User]

Signal Strength & Quality

Depending on the Receiver in use:

The signal strength is not really a satellite signal, it is a feedback signal measuring the current to the LNB, this signal does not go up and down when you point the dish at a satellite, any satellite, or if you point the dish at a tree, ground or building, the signal level is good only if the LNB and cabling has good continuity between the Receiver and the LNB.

Quality is an actual digital satellite signal level, it comes from the ONE transponder you have selected in the menu, and again it does not mean you are on the correct satellite, just that the transponder frequency you have chosen has been found and it does have MPEG2 digital packets on it.
Most FTAs now have a popup banner that will come up telling you what satellite you are on, this popup banner is from information contained in the digital packets, so no Quality = no banner will come up.

Source : Indian Televisionpoint

[challenger View Profile Find User's Posts Find User's Threads PM User E-Mail User]

Good tip Anish Guests cannot see images in the messages. Please register to forum by clicking here to see images.

[admin View Profile Find User's Posts Find User's Threads PM User E-Mail User]

Its an Old Post By Aashsih, i got it from Dishtracking.com/forum cache from Google.

Can u pls Once again post the multiple LNB Attach through Diseque Post.

[challenger View Profile Find User's Posts Find User's Threads PM User E-Mail User]

Yes Anish, I've posted it . 25/10/08 12:42:44 PM

[admin View Profile Find User's Posts Find User's Threads PM User E-Mail User]

Yes got it

[timkamat View Profile Find User's Posts Find User's Threads PM User E-Mail User]

I'm a dishtv customer having problem wid dd direct signals.DISHTV frequency 12595v/27500 is lower of all dishtv frequencies.While for dd direct plus frequency 11490v/27500 is 6%lower than other frequencies.this gives me great trouble since I live in Goa where it rains heavily.IF I set 12595V/27500 to 71% dd frequency 11490 goes below 60 which I actually need at 65.WHY DONT DD HAVE ALL THEIR FREQ.AT SAME LEVEL?OR WHY CANT DISHTV STOP RETRANSMITTING DD SIGNALS & PUT THOSE CHANNELS ON THEIR OWN PLATFORM?ANYHOW HOW SHALL I solve this problem?

[admin View Profile Find User's Posts Find User's Threads PM User E-Mail User]

use good quality Dish, or otherwise use two dishes for Nss6 and Insat 4B.

[marghuz270 View Profile Find User's Posts Find User's Threads PM User E-Mail User]

I am facing a lot of problems receiving ary one world on intelsat 10 the frequency is 3864 H 19850. dish size 6ft receiver super lazer 10000. It is quite unpredictable I might receive it today but tomorrow I might not. What is the problem please guide me.

[marghuz270 View Profile Find User's Posts Find User's Threads PM User E-Mail User]

I am having problem in receiving Ary one world, Ary digital Asia on intelsat10 frequency 3864 symbol rate 19850 polarity horizontal. I am using a 6ft dish and receiver super lazer 10000. with the change of weather in April the signal quality is reduced resulting in no reception. please help me.

[in_msz View Profile Find User's Posts Find User's Threads PM User E-Mail User]

8ft dish is standard dish recommended for c band reception. plz use it ,or have to be highly skilled to so a setup.